The Climax model 35 energy absorber set, together with a safety harness, is an indispensable element for a safe fall arrest system. The energy absorber is designed to protect when installing scaffolding, as the design of the Y-shaped securing strap enables the user to be secured to the structure at all.Features:The Climax model 35 energy absorbing set is manufactured with very rugged materials, able to support the most demanding work situations, ensuring prefect protection at all times. The energy absorber is composed of an absorption strap and a Y-shaped securing and anchoring strap The absorption strap is white and comprises two interwoven textile pieces, folded and located within a transparent plastic cover. In the case of a fall, the stitches joining the two textile pieces tear apart progressively, absorbing the energy of the fall. The anchoring strap is composed of two twisted polyamide three-strand ropes with a diameter of 14 mm and a greatresistance to traction. The supports a minimum breakage load of 32 KN. The rope also has a red filament to indicate  wear. The assembly has a total length of 1.85 m, enabling good freedom of movements.Swinging diameter: 2 mMinimum safety height: 6 mApplications:The energy absorber must be used in combination with a fall arrest harness (such as Climax models 26-C, 27-C, 28-C and 29-C) being joined together with snaphooks (Climax model 30 snaphook). The set constitutes an extremely safe and rugged fall arrest system, enabling the user to be attached to the structure at all times thanks to the Y-shaped anchoring strap, as well as offering mobility.Certifications:UNE-EN 355: 1993UNE-EN 362: 1993Health and safety requirements of R. D.1407/1992Regulatory agency No. 0159Technical Data:Length of the absorption strap: 75cmForce to start the tearing: F=2kNTotal length of the absorber: 185cmStatic resistance to traction: F>22kNDynamic behaviour: F<6kNKit Includes:Energy absorber: Mod 32-ANon adjustable lanyard: Cu 29/12 Connectors: Mod 31Connector: Mod 30